From 5b83b7b854054900abe7fef699d81943892e6e7a Mon Sep 17 00:00:00 2001 From: Theodoros Foradis Date: Fri, 28 Oct 2016 20:36:06 +0300 Subject: gnu: Add openocd. * gnu/packages/embedded.scm (openocd): New variable. * gnu/packages/patches/openocd-nrf52.patch: New file. * gnu/local.mk (dist_patch_DATA): Add the patch. --- gnu/packages/patches/openocd-nrf52.patch | 843 +++++++++++++++++++++++++++++++ 1 file changed, 843 insertions(+) create mode 100644 gnu/packages/patches/openocd-nrf52.patch (limited to 'gnu/packages/patches/openocd-nrf52.patch') diff --git a/gnu/packages/patches/openocd-nrf52.patch b/gnu/packages/patches/openocd-nrf52.patch new file mode 100644 index 0000000000..792575df78 --- /dev/null +++ b/gnu/packages/patches/openocd-nrf52.patch @@ -0,0 +1,843 @@ +This patch adds support for nRF52 series devices. It is patchset 7 from +, which has been tested, but not +merged yet in master. + +From: Michael Dietz +Date: Mon, 30 May 2016 12:50:44 +0000 (-0700) +Subject: Added support for nRF52 Series Devices. +X-Git-Url: http://openocd.zylin.com/gitweb?p=openocd.git;a=commitdiff_plain;h=9ba15633e221d9d72e320372ba8f49d3f30d4bce + +Added support for nRF52 Series Devices. + +Both nrf52.c and nrf52.cfg are based off of previous nRF51 files. +- Some possible race conditions with NVMC have been fixed in nRF52.c +- Removed nrf51_get_probed_chip_if_halted() as the core does not have to be halted to perform operations where it is called. +- Only registers that are needed by openOCD are defined, some registers in nRF51 don't exist in nRF52 and are removed. +- Some all around cleanup has been done. +- The protection mechanism is completely different on nRF52 and this has not been implemented yet - just prints a warning and returns for now. + +Change-Id: I4dd42c86f33f450709bb981806c2655f04aa6201 +Signed-off-by: Michael Dietz +--- + +diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am +index c167e8f..b6a2be3 100644 +--- a/src/flash/nor/Makefile.am ++++ b/src/flash/nor/Makefile.am +@@ -37,6 +37,7 @@ NOR_DRIVERS = \ + niietcm4.c \ + non_cfi.c \ + nrf51.c \ ++ nrf52.c \ + numicro.c \ + ocl.c \ + pic32mx.c \ +diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c +index 56a5cb2..3e071bd 100644 +--- a/src/flash/nor/drivers.c ++++ b/src/flash/nor/drivers.c +@@ -48,6 +48,7 @@ extern struct flash_driver mdr_flash; + extern struct flash_driver mrvlqspi_flash; + extern struct flash_driver niietcm4_flash; + extern struct flash_driver nrf51_flash; ++extern struct flash_driver nrf52_flash; + extern struct flash_driver numicro_flash; + extern struct flash_driver ocl_flash; + extern struct flash_driver pic32mx_flash; +@@ -100,6 +101,7 @@ static struct flash_driver *flash_drivers[] = { + &mrvlqspi_flash, + &niietcm4_flash, + &nrf51_flash, ++ &nrf52_flash, + &numicro_flash, + &ocl_flash, + &pic32mx_flash, +diff --git a/src/flash/nor/nrf52.c b/src/flash/nor/nrf52.c +new file mode 100644 +index 0000000..7f2bd35 +--- /dev/null ++++ b/src/flash/nor/nrf52.c +@@ -0,0 +1,733 @@ ++/*************************************************************************** ++ * Copyright (C) 2013 Synapse Product Development * ++ * Andrey Smirnov * ++ * Angus Gratton * ++ * Erdem U. Altunyurt * ++ * * ++ * This program is free software; you can redistribute it and/or modify * ++ * it under the terms of the GNU General Public License as published by * ++ * the Free Software Foundation; either version 2 of the License, or * ++ * (at your option) any later version. * ++ * * ++ * This program is distributed in the hope that it will be useful, * ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of * ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * ++ * GNU General Public License for more details. * ++ * * ++ * You should have received a copy of the GNU General Public License * ++ * along with this program. If not, see . * ++ ***************************************************************************/ ++ ++#ifdef HAVE_CONFIG_H ++#include "config.h" ++#endif ++ ++#include ++ ++#include "imp.h" ++#include ++#include ++#include ++ ++/* nRF52 Register addresses used by openOCD. */ ++#define NRF52_FLASH_BASE_ADDR (0x0) ++ ++#define NRF52_FICR_BASE_ADDR (0x10000000) ++#define NRF52_FICR_CODEPAGESIZE_ADDR (NRF52_FICR_BASE_ADDR | 0x010) ++#define NRF52_FICR_CODESIZE_ADDR (NRF52_FICR_BASE_ADDR | 0x014) ++ ++#define NRF52_UICR_BASE_ADDR (0x10001000) ++ ++#define NRF52_NVMC_BASE_ADDR (0x4001E000) ++#define NRF52_NVMC_READY_ADDR (NRF52_NVMC_BASE_ADDR | 0x400) ++#define NRF52_NVMC_CONFIG_ADDR (NRF52_NVMC_BASE_ADDR | 0x504) ++#define NRF52_NVMC_ERASEPAGE_ADDR (NRF52_NVMC_BASE_ADDR | 0x508) ++#define NRF52_NVMC_ERASEALL_ADDR (NRF52_NVMC_BASE_ADDR | 0x50C) ++#define NRF52_NVMC_ERASEUICR_ADDR (NRF52_NVMC_BASE_ADDR | 0x514) ++ ++/* nRF52 bit fields. */ ++enum nrf52_nvmc_config_bits { ++ NRF52_NVMC_CONFIG_REN = 0x0, ++ NRF52_NVMC_CONFIG_WEN = 0x01, ++ NRF52_NVMC_CONFIG_EEN = 0x02 ++}; ++ ++enum nrf52_nvmc_ready_bits { ++ NRF52_NVMC_BUSY = 0x0, ++ NRF52_NVMC_READY = 0x01 ++}; ++ ++/* nRF52 state information. */ ++struct nrf52_info { ++ uint32_t code_page_size; /* Size of FLASH page in bytes. */ ++ uint32_t code_memory_size; /* Size of Code FLASH region in bytes. */ ++ ++ struct { ++ bool probed; ++ int (*write) (struct flash_bank *bank, ++ struct nrf52_info *chip, ++ const uint8_t *buffer, uint32_t offset, uint32_t count); ++ } bank[2]; /* There are two regions in nRF52 FLASH - Code and UICR. */ ++ struct target *target; ++}; ++ ++static int nrf52_protect_check(struct flash_bank *bank); ++ ++static int nrf52_probe(struct flash_bank *bank) ++{ ++ int res; ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ res = target_read_u32(chip->target, ++ NRF52_FICR_CODEPAGESIZE_ADDR, ++ &chip->code_page_size); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Couldn't read code page size"); ++ return res; ++ } ++ ++ res = target_read_u32(chip->target, ++ NRF52_FICR_CODESIZE_ADDR, ++ &chip->code_memory_size); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Couldn't read code memory size"); ++ return res; ++ } ++ ++ chip->code_memory_size = chip->code_memory_size * chip->code_page_size; ++ ++ if (bank->base == NRF52_FLASH_BASE_ADDR) { ++ bank->size = chip->code_memory_size; ++ bank->num_sectors = bank->size / chip->code_page_size; ++ bank->sectors = calloc(bank->num_sectors, ++ sizeof((bank->sectors)[0])); ++ if (!bank->sectors) ++ return ERROR_FLASH_BANK_NOT_PROBED; ++ ++ /* Fill out the sector information: All nRF51 sectors are the same size. */ ++ for (int i = 0; i < bank->num_sectors; i++) { ++ bank->sectors[i].size = chip->code_page_size; ++ bank->sectors[i].offset = i * chip->code_page_size; ++ ++ /* Mark as unknown. */ ++ bank->sectors[i].is_erased = -1; ++ bank->sectors[i].is_protected = -1; ++ } ++ ++ nrf52_protect_check(bank); ++ ++ chip->bank[0].probed = true; ++ } else { /* This is the UICR bank. */ ++ bank->size = chip->code_page_size; ++ bank->num_sectors = 1; ++ bank->sectors = calloc(bank->num_sectors, ++ sizeof((bank->sectors)[0])); ++ if (!bank->sectors) ++ return ERROR_FLASH_BANK_NOT_PROBED; ++ ++ bank->sectors[0].size = bank->size; ++ bank->sectors[0].offset = 0; ++ ++ bank->sectors[0].is_erased = -1; ++ bank->sectors[0].is_protected = -1; ++ ++ chip->bank[1].probed = true; ++ } ++ ++ return ERROR_OK; ++} ++ ++static int nrf52_bank_is_probed(struct flash_bank *bank) ++{ ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ return chip->bank[bank->bank_number].probed; ++} ++ ++static int nrf52_auto_probe(struct flash_bank *bank) ++{ ++ if (!nrf52_bank_is_probed(bank)) ++ return nrf52_probe(bank); ++ else ++ return ERROR_OK; ++} ++ ++static int nrf52_wait_for_nvmc(struct nrf52_info *chip) ++{ ++ int res; ++ uint32_t ready; ++ int timeout = 100; ++ ++ do { ++ res = target_read_u32(chip->target, NRF52_NVMC_READY_ADDR, &ready); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Couldn't read NVMC_READY register"); ++ return res; ++ } ++ ++ if (ready == NRF52_NVMC_READY) ++ return ERROR_OK; ++ ++ alive_sleep(1); ++ } while (timeout--); ++ ++ LOG_DEBUG("Timed out waiting for the NVMC to be ready"); ++ return ERROR_FLASH_BUSY; ++} ++ ++static int nrf52_nvmc_erase_enable(struct nrf52_info *chip) ++{ ++ int res; ++ ++ res = nrf52_wait_for_nvmc(chip); ++ if (res != ERROR_OK) ++ return res; ++ ++ res = target_write_u32(chip->target, ++ NRF52_NVMC_CONFIG_ADDR, ++ NRF52_NVMC_CONFIG_EEN); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Failed to configure the NVMC for erasing"); ++ return res; ++ } ++ ++ return res; ++} ++ ++static int nrf52_nvmc_write_enable(struct nrf52_info *chip) ++{ ++ int res; ++ ++ res = nrf52_wait_for_nvmc(chip); ++ if (res != ERROR_OK) ++ return res; ++ ++ res = target_write_u32(chip->target, ++ NRF52_NVMC_CONFIG_ADDR, ++ NRF52_NVMC_CONFIG_WEN); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Failed to configure the NVMC for writing"); ++ return res; ++ } ++ ++ return res; ++} ++ ++static int nrf52_nvmc_read_only(struct nrf52_info *chip) ++{ ++ int res; ++ ++ res = nrf52_wait_for_nvmc(chip); ++ if (res != ERROR_OK) ++ return res; ++ ++ res = target_write_u32(chip->target, ++ NRF52_NVMC_CONFIG_ADDR, ++ NRF52_NVMC_CONFIG_REN); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Failed to configure the NVMC for read-only"); ++ return res; ++ } ++ ++ return res; ++} ++ ++static int nrf52_nvmc_generic_erase(struct nrf52_info *chip, ++ uint32_t erase_register, ++ uint32_t erase_value) ++{ ++ int res; ++ ++ res = nrf52_nvmc_erase_enable(chip); ++ if (res != ERROR_OK) ++ return res; ++ ++ res = target_write_u32(chip->target, ++ erase_register, ++ erase_value); ++ if (res != ERROR_OK) ++ LOG_ERROR("Failed to write NVMC erase register"); ++ ++ return nrf52_nvmc_read_only(chip); ++} ++ ++static int nrf52_protect_check(struct flash_bank *bank) ++{ ++ LOG_WARNING("nrf52_protect_check() is not implemented for nRF52 series devices yet"); ++ return ERROR_OK; ++} ++ ++static int nrf52_protect(struct flash_bank *bank, int set, int first, int last) ++{ ++ LOG_WARNING("nrf52_protect() is not implemented for nRF52 series devices yet"); ++ return ERROR_OK; ++} ++ ++static struct flash_sector *nrf52_find_sector_by_address(struct flash_bank *bank, uint32_t address) ++{ ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ for (int i = 0; i < bank->num_sectors; i++) ++ if (bank->sectors[i].offset <= address && ++ address < (bank->sectors[i].offset + chip->code_page_size)) { ++ return &bank->sectors[i]; ++ } ++ ++ return NULL; ++} ++ ++static int nrf52_erase_all(struct nrf52_info *chip) ++{ ++ LOG_DEBUG("Erasing all non-volatile memory"); ++ return nrf52_nvmc_generic_erase(chip, ++ NRF52_NVMC_ERASEALL_ADDR, ++ 0x01); ++} ++ ++static int nrf52_erase_page(struct flash_bank *bank, ++ struct nrf52_info *chip, ++ struct flash_sector *sector) ++{ ++ int res; ++ ++ LOG_DEBUG("Erasing page at 0x%"PRIx32, sector->offset); ++ if (sector->is_protected == 1) { ++ LOG_ERROR("Cannot erase protected sector at 0x%" PRIx32, sector->offset); ++ return ERROR_FAIL; ++ } ++ ++ if (bank->base == NRF52_UICR_BASE_ADDR) { ++ res = nrf52_nvmc_generic_erase(chip, ++ NRF52_NVMC_ERASEUICR_ADDR, ++ 0x00000001); ++ } else { ++ res = nrf52_nvmc_generic_erase(chip, ++ NRF52_NVMC_ERASEPAGE_ADDR, ++ sector->offset); ++ } ++ ++ if (res == ERROR_OK) ++ sector->is_erased = 1; ++ return res; ++} ++ ++static const uint8_t nrf52_flash_write_code[] = { ++ /* See contrib/loaders/flash/cortex-m0.S */ ++ /* : */ ++ 0x0d, 0x68, /* ldr r5, [r1, #0] */ ++ 0x00, 0x2d, /* cmp r5, #0 */ ++ 0x0b, 0xd0, /* beq.n 1e */ ++ 0x4c, 0x68, /* ldr r4, [r1, #4] */ ++ 0xac, 0x42, /* cmp r4, r5 */ ++ 0xf9, 0xd0, /* beq.n 0 */ ++ 0x20, 0xcc, /* ldmia r4!, {r5} */ ++ 0x20, 0xc3, /* stmia r3!, {r5} */ ++ 0x94, 0x42, /* cmp r4, r2 */ ++ 0x01, 0xd3, /* bcc.n 18 */ ++ 0x0c, 0x46, /* mov r4, r1 */ ++ 0x08, 0x34, /* adds r4, #8 */ ++ /* : */ ++ 0x4c, 0x60, /* str r4, [r1, #4] */ ++ 0x04, 0x38, /* subs r0, #4 */ ++ 0xf0, 0xd1, /* bne.n 0 */ ++ /* : */ ++ 0x00, 0xbe /* bkpt 0x0000 */ ++}; ++ ++ ++/* Start a low level flash write for the specified region */ ++static int nrf52_ll_flash_write(struct nrf52_info *chip, uint32_t offset, const uint8_t *buffer, uint32_t bytes) ++{ ++ struct target *target = chip->target; ++ uint32_t buffer_size = 8192; ++ struct working_area *write_algorithm; ++ struct working_area *source; ++ uint32_t address = NRF52_FLASH_BASE_ADDR + offset; ++ struct reg_param reg_params[4]; ++ struct armv7m_algorithm armv7m_info; ++ int retval = ERROR_OK; ++ ++ LOG_DEBUG("Writing buffer to flash offset=0x%"PRIx32" bytes=0x%"PRIx32, offset, bytes); ++ assert(bytes % 4 == 0); ++ ++ /* allocate working area with flash programming code */ ++ if (target_alloc_working_area(target, sizeof(nrf52_flash_write_code), ++ &write_algorithm) != ERROR_OK) { ++ LOG_WARNING("no working area available, falling back to slow memory writes"); ++ ++ for (; bytes > 0; bytes -= 4) { ++ retval = target_write_memory(chip->target, ++ offset, 4, 1, buffer); ++ if (retval != ERROR_OK) ++ return retval; ++ ++ retval = nrf52_wait_for_nvmc(chip); ++ if (retval != ERROR_OK) ++ return retval; ++ ++ offset += 4; ++ buffer += 4; ++ } ++ ++ return ERROR_OK; ++ } ++ ++ LOG_WARNING("using fast async flash loader. This is currently supported"); ++ LOG_WARNING("only with ST-Link and CMSIS-DAP. If you have issues, add"); ++ LOG_WARNING("\"set WORKAREASIZE 0\" before sourcing nrf52.cfg to disable it"); ++ ++ retval = target_write_buffer(target, write_algorithm->address, ++ sizeof(nrf52_flash_write_code), ++ nrf52_flash_write_code); ++ if (retval != ERROR_OK) ++ return retval; ++ ++ /* memory buffer */ ++ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) { ++ buffer_size /= 2; ++ buffer_size &= ~3UL; /* Make sure it's 4 byte aligned */ ++ if (buffer_size <= 256) { ++ /* free working area, write algorithm already allocated */ ++ target_free_working_area(target, write_algorithm); ++ ++ LOG_WARNING("No large enough working area available, can't do block memory writes"); ++ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; ++ } ++ } ++ ++ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; ++ armv7m_info.core_mode = ARM_MODE_THREAD; ++ ++ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* byte count */ ++ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer start */ ++ init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* buffer end */ ++ init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); /* target address */ ++ ++ buf_set_u32(reg_params[0].value, 0, 32, bytes); ++ buf_set_u32(reg_params[1].value, 0, 32, source->address); ++ buf_set_u32(reg_params[2].value, 0, 32, source->address + source->size); ++ buf_set_u32(reg_params[3].value, 0, 32, address); ++ ++ retval = target_run_flash_async_algorithm(target, buffer, bytes/4, 4, ++ 0, NULL, ++ 4, reg_params, ++ source->address, source->size, ++ write_algorithm->address, 0, ++ &armv7m_info); ++ ++ target_free_working_area(target, source); ++ target_free_working_area(target, write_algorithm); ++ ++ destroy_reg_param(®_params[0]); ++ destroy_reg_param(®_params[1]); ++ destroy_reg_param(®_params[2]); ++ destroy_reg_param(®_params[3]); ++ ++ return retval; ++} ++ ++/* Check and erase flash sectors in specified range, then start a low level page write. ++ start/end must be sector aligned. ++*/ ++static int nrf52_write_pages(struct flash_bank *bank, uint32_t start, uint32_t end, const uint8_t *buffer) ++{ ++ int res; ++ uint32_t offset; ++ struct flash_sector *sector; ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ assert(start % chip->code_page_size == 0); ++ assert(end % chip->code_page_size == 0); ++ ++ /* Erase all sectors */ ++ for (offset = start; offset < end; offset += chip->code_page_size) { ++ sector = nrf52_find_sector_by_address(bank, offset); ++ ++ if (sector == NULL) { ++ LOG_ERROR("Invalid sector @ 0x%08"PRIx32, offset); ++ return ERROR_FLASH_SECTOR_INVALID; ++ } ++ ++ if (sector->is_protected == 1) { ++ LOG_ERROR("Can't erase protected sector @ 0x%08"PRIx32, offset); ++ return ERROR_FAIL; ++ } ++ ++ if (sector->is_erased != 1) { /* 1 = erased, 0= not erased, -1 = unknown */ ++ res = nrf52_erase_page(bank, chip, sector); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Failed to erase sector @ 0x%08"PRIx32, sector->offset); ++ return res; ++ } ++ } ++ sector->is_erased = 1; ++ } ++ ++ res = nrf52_nvmc_write_enable(chip); ++ if (res != ERROR_OK) ++ return res; ++ ++ res = nrf52_ll_flash_write(chip, start, buffer, (end - start)); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Failed to write FLASH"); ++ nrf52_nvmc_read_only(chip); ++ return res; ++ } ++ ++ return nrf52_nvmc_read_only(chip); ++} ++ ++static int nrf52_erase(struct flash_bank *bank, int first, int last) ++{ ++ int res = ERROR_OK; ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ /* For each sector to be erased */ ++ for (int s = first; s <= last && res == ERROR_OK; s++) ++ res = nrf52_erase_page(bank, chip, &bank->sectors[s]); ++ ++ return res; ++} ++ ++static int nrf52_code_flash_write(struct flash_bank *bank, ++ struct nrf52_info *chip, ++ const uint8_t *buffer, uint32_t offset, uint32_t count) ++{ ++ int res; ++ /* Need to perform reads to fill any gaps we need to preserve in the first page, ++ before the start of buffer, or in the last page, after the end of buffer */ ++ uint32_t first_page = offset / chip->code_page_size; ++ uint32_t last_page = DIV_ROUND_UP(offset+count, chip->code_page_size); ++ ++ uint32_t first_page_offset = first_page * chip->code_page_size; ++ uint32_t last_page_offset = last_page * chip->code_page_size; ++ ++ LOG_DEBUG("Padding write from 0x%08"PRIx32"-0x%08"PRIx32" as 0x%08"PRIx32"-0x%08"PRIx32, ++ offset, offset+count, first_page_offset, last_page_offset); ++ ++ uint32_t page_cnt = last_page - first_page; ++ uint8_t buffer_to_flash[page_cnt * chip->code_page_size]; ++ ++ /* Fill in any space between start of first page and start of buffer */ ++ uint32_t pre = offset - first_page_offset; ++ if (pre > 0) { ++ res = target_read_memory(bank->target, first_page_offset, 1, pre, buffer_to_flash); ++ if (res != ERROR_OK) ++ return res; ++ } ++ ++ /* Fill in main contents of buffer */ ++ memcpy(buffer_to_flash + pre, buffer, count); ++ ++ /* Fill in any space between end of buffer and end of last page */ ++ uint32_t post = last_page_offset - (offset + count); ++ if (post > 0) { ++ /* Retrieve the full row contents from Flash */ ++ res = target_read_memory(bank->target, offset + count, 1, post, buffer_to_flash + pre + count); ++ if (res != ERROR_OK) ++ return res; ++ } ++ ++ return nrf52_write_pages(bank, first_page_offset, last_page_offset, buffer_to_flash); ++} ++ ++static int nrf52_uicr_flash_write(struct flash_bank *bank, ++ struct nrf52_info *chip, ++ const uint8_t *buffer, uint32_t offset, uint32_t count) ++{ ++ int res; ++ uint32_t nrf52_uicr_size = chip->code_page_size; ++ uint8_t uicr[nrf52_uicr_size]; ++ struct flash_sector *sector = &bank->sectors[0]; ++ ++ if ((offset + count) > nrf52_uicr_size) ++ return ERROR_FAIL; ++ ++ res = target_read_memory(bank->target, NRF52_UICR_BASE_ADDR, 1, nrf52_uicr_size, uicr); ++ ++ if (res != ERROR_OK) ++ return res; ++ ++ if (sector->is_erased != 1) { ++ res = nrf52_erase_page(bank, chip, sector); ++ if (res != ERROR_OK) ++ return res; ++ } ++ ++ memcpy(&uicr[offset], buffer, count); ++ ++ res = nrf52_nvmc_write_enable(chip); ++ if (res != ERROR_OK) ++ return res; ++ ++ res = nrf52_ll_flash_write(chip, NRF52_UICR_BASE_ADDR, uicr, nrf52_uicr_size); ++ if (res != ERROR_OK) { ++ nrf52_nvmc_read_only(chip); ++ return res; ++ } ++ ++ return nrf52_nvmc_read_only(chip); ++} ++ ++ ++static int nrf52_write(struct flash_bank *bank, const uint8_t *buffer, ++ uint32_t offset, uint32_t count) ++{ ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ return chip->bank[bank->bank_number].write(bank, chip, buffer, offset, count); ++} ++ ++ ++FLASH_BANK_COMMAND_HANDLER(nrf52_flash_bank_command) ++{ ++ static struct nrf52_info *chip; ++ ++ assert(bank != NULL); ++ ++ switch (bank->base) { ++ case NRF52_FLASH_BASE_ADDR: ++ bank->bank_number = 0; ++ break; ++ case NRF52_UICR_BASE_ADDR: ++ bank->bank_number = 1; ++ break; ++ default: ++ LOG_ERROR("Invalid bank address 0x%08" PRIx32, bank->base); ++ return ERROR_FAIL; ++ } ++ ++ if (!chip) { ++ /* Create a new chip */ ++ chip = calloc(1, sizeof(*chip)); ++ assert(chip != NULL); ++ ++ chip->target = bank->target; ++ } ++ ++ switch (bank->base) { ++ case NRF52_FLASH_BASE_ADDR: ++ chip->bank[bank->bank_number].write = nrf52_code_flash_write; ++ break; ++ case NRF52_UICR_BASE_ADDR: ++ chip->bank[bank->bank_number].write = nrf52_uicr_flash_write; ++ break; ++ } ++ ++ chip->bank[bank->bank_number].probed = false; ++ bank->driver_priv = chip; ++ ++ return ERROR_OK; ++} ++ ++COMMAND_HANDLER(nrf52_handle_mass_erase_command) ++{ ++ int res; ++ struct flash_bank *bank = NULL; ++ struct target *target = get_current_target(CMD_CTX); ++ ++ res = get_flash_bank_by_addr(target, NRF52_FLASH_BASE_ADDR, true, &bank); ++ if (res != ERROR_OK) ++ return res; ++ ++ assert(bank != NULL); ++ ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ res = nrf52_erase_all(chip); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Failed to erase the chip"); ++ nrf52_protect_check(bank); ++ return res; ++ } ++ ++ for (int i = 0; i < bank->num_sectors; i++) ++ bank->sectors[i].is_erased = 1; ++ ++ res = nrf52_protect_check(bank); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Failed to check chip's write protection"); ++ return res; ++ } ++ ++ res = get_flash_bank_by_addr(target, NRF52_UICR_BASE_ADDR, true, &bank); ++ if (res != ERROR_OK) ++ return res; ++ ++ bank->sectors[0].is_erased = 1; ++ ++ return ERROR_OK; ++} ++ ++static int nrf52_info(struct flash_bank *bank, char *buf, int buf_size) ++{ ++ int res; ++ uint32_t ficr[2]; ++ struct nrf52_info *chip = bank->driver_priv; ++ assert(chip != NULL); ++ ++ res = target_read_u32(chip->target, NRF52_FICR_CODEPAGESIZE_ADDR, &ficr[0]); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Couldn't read NVMC_READY register"); ++ return res; ++ } ++ ++ res = target_read_u32(chip->target, NRF52_FICR_CODESIZE_ADDR, &ficr[1]); ++ if (res != ERROR_OK) { ++ LOG_ERROR("Couldn't read NVMC_READY register"); ++ return res; ++ } ++ ++ snprintf(buf, buf_size, ++ "\n--------nRF52 Series Device--------\n\n" ++ "\n[factory information control block]\n" ++ "code page size: %"PRIu32"B\n" ++ "code memory size: %"PRIu32"kB\n", ++ ficr[0], ++ (ficr[1] * ficr[0]) / 1024); ++ ++ return ERROR_OK; ++} ++ ++static const struct command_registration nrf52_exec_command_handlers[] = { ++ { ++ .name = "mass_erase", ++ .handler = nrf52_handle_mass_erase_command, ++ .mode = COMMAND_EXEC, ++ .help = "Erase all flash contents of the chip.", ++ }, ++ COMMAND_REGISTRATION_DONE ++}; ++ ++static const struct command_registration nrf52_command_handlers[] = { ++ { ++ .name = "nrf52", ++ .mode = COMMAND_ANY, ++ .help = "nrf52 flash command group", ++ .usage = "", ++ .chain = nrf52_exec_command_handlers, ++ }, ++ COMMAND_REGISTRATION_DONE ++}; ++ ++struct flash_driver nrf52_flash = { ++ .name = "nrf52", ++ .commands = nrf52_command_handlers, ++ .flash_bank_command = nrf52_flash_bank_command, ++ .info = nrf52_info, ++ .erase = nrf52_erase, ++ .protect = nrf52_protect, ++ .write = nrf52_write, ++ .read = default_flash_read, ++ .probe = nrf52_probe, ++ .auto_probe = nrf52_auto_probe, ++ .erase_check = default_flash_blank_check, ++ .protect_check = nrf52_protect_check, ++}; +diff --git a/tcl/target/nrf52.cfg b/tcl/target/nrf52.cfg +index c1cbf1a..a2567ff 100644 +--- a/tcl/target/nrf52.cfg ++++ b/tcl/target/nrf52.cfg +@@ -5,15 +5,22 @@ + source [find target/swj-dp.tcl] + + if { [info exists CHIPNAME] } { +- set _CHIPNAME $CHIPNAME ++ set _CHIPNAME $CHIPNAME + } else { +- set _CHIPNAME nrf52 ++ set _CHIPNAME nrf52 ++} ++ ++# Work-area is a space in RAM used for flash programming, by default use 16kB. ++if { [info exists WORKAREASIZE] } { ++ set _WORKAREASIZE $WORKAREASIZE ++} else { ++ set _WORKAREASIZE 0x4000 + } + + if { [info exists CPUTAPID] } { +- set _CPUTAPID $CPUTAPID ++ set _CPUTAPID $CPUTAPID + } else { +- set _CPUTAPID 0x2ba01477 ++ set _CPUTAPID 0x2ba01477 + } + + swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID +@@ -21,8 +28,15 @@ swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID + set _TARGETNAME $_CHIPNAME.cpu + target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME + +-adapter_khz 10000 ++$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +-if { ![using_hla] } { +- cortex_m reset_config sysresetreq ++if {![using_hla]} { ++ cortex_m reset_config sysresetreq + } ++ ++flash bank $_CHIPNAME.flash nrf52 0x00000000 0 1 1 $_TARGETNAME ++flash bank $_CHIPNAME.uicr nrf52 0x10001000 0 1 1 $_TARGETNAME ++ ++adapter_khz 1000 ++ ++$_TARGETNAME configure -event reset-end {} -- cgit v1.2.3