diff options
author | Marius Bakke <mbakke@fastmail.com> | 2018-12-11 22:18:05 +0100 |
---|---|---|
committer | Marius Bakke <mbakke@fastmail.com> | 2018-12-11 22:18:05 +0100 |
commit | b03e4fd5269897448124a7b61a737802b2c638ee (patch) | |
tree | e4eaab1d3076e335c57eea462ff7fda7919f0831 /gnu/packages/patches/u-boot-pinebook-dts.patch | |
parent | da3c6a7f19ef1243af725f63c16c8fd92fde33b4 (diff) | |
parent | 99aad42138e0895df51e64e1261984f277952516 (diff) | |
download | guix-patches-b03e4fd5269897448124a7b61a737802b2c638ee.tar guix-patches-b03e4fd5269897448124a7b61a737802b2c638ee.tar.gz |
Merge branch 'master' into core-updates
Diffstat (limited to 'gnu/packages/patches/u-boot-pinebook-dts.patch')
-rw-r--r-- | gnu/packages/patches/u-boot-pinebook-dts.patch | 388 |
1 files changed, 388 insertions, 0 deletions
diff --git a/gnu/packages/patches/u-boot-pinebook-dts.patch b/gnu/packages/patches/u-boot-pinebook-dts.patch new file mode 100644 index 0000000000..48c004fdfc --- /dev/null +++ b/gnu/packages/patches/u-boot-pinebook-dts.patch @@ -0,0 +1,388 @@ +From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001 +From: Vasily Khoruzhick <anarsoul@gmail.com> +Date: Mon, 5 Nov 2018 20:24:31 -0800 +Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook + +Pinebook is a laptop produced by Pine64, with USB-connected keyboard, +USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP +bridge from Analogix. + +Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> +Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> +Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> +Cc: Vagrant Cascadian <vagrant@debian.org> +Reviewed-by: Jagan Teki <jagan@openedev.com> +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++ + arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++++++++++++ + configs/pinebook_defconfig | 22 ++ + 4 files changed, 332 insertions(+) + create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi + create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts + create mode 100644 configs/pinebook_defconfig + +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile +index 3093c1185e..eae6b9ee5d 100644 +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \ + sun50i-a64-orangepi-win.dtb \ + sun50i-a64-pine64-plus.dtb \ + sun50i-a64-pine64.dtb \ ++ sun50i-a64-pinebook.dtb \ + sun50i-a64-sopine-baseboard.dtb + dtb-$(CONFIG_MACH_SUN9I) += \ + sun9i-a80-optimus.dtb \ +diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi +new file mode 100644 +index 0000000000..a99b7171d0 +--- /dev/null ++++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi +@@ -0,0 +1,15 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> ++ * ++ */ ++ ++/* The ANX6345 eDP-bridge is on r_i2c */ ++&r_i2c { ++ anx6345: edp-bridge@38 { ++ compatible = "analogix,anx6345"; ++ reg = <0x38>; ++ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ ++ status = "okay"; ++ }; ++}; +diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts +new file mode 100644 +index 0000000000..ec537c5297 +--- /dev/null ++++ b/arch/arm/dts/sun50i-a64-pinebook.dts +@@ -0,0 +1,294 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> ++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> ++ * ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-a64.dtsi" ++ ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/pwm/pwm.h> ++ ++/ { ++ model = "Pinebook"; ++ compatible = "pine64,pinebook", "allwinner,sun50i-a64"; ++ ++ aliases { ++ serial0 = &uart0; ++ ethernet0 = &rtl8723cs; ++ }; ++ ++ vdd_bl: regulator@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "bl-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ ++ enable-active-high; ++ }; ++ ++ backlight: backlight { ++ compatible = "pwm-backlight"; ++ pwms = <&pwm 0 50000 0>; ++ brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; ++ default-brightness-level = <2>; ++ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ ++ power-supply = <&vdd_bl>; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ ++ framebuffer-lcd { ++ panel-supply = <®_dc1sw>; ++ dvdd25-supply = <®_dldo2>; ++ dvdd12-supply = <®_fldo1>; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ ++ lid_switch { ++ label = "Lid Switch"; ++ gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ ++ linux,input-type = <EV_SW>; ++ linux,code = <SW_LID>; ++ linux,can-disable; ++ wakeup-source; ++ }; ++ }; ++ ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ ++ }; ++}; ++ ++&ehci0 { ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ status = "okay"; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins>; ++ vmmc-supply = <®_dcdc1>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; ++ disable-wp; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ vmmc-supply = <®_dldo4>; ++ vqmmc-supply = <®_eldo1>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8723cs: wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&mmc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; ++ vmmc-supply = <®_dcdc1>; ++ vqmmc-supply = <®_eldo1>; ++ bus-width = <8>; ++ non-removable; ++ cap-mmc-hw-reset; ++ mmc-hs200-1_8v; ++ status = "okay"; ++}; ++ ++&ohci0 { ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&pwm { ++ status = "okay"; ++}; ++ ++&r_rsb { ++ status = "okay"; ++ ++ axp803: pmic@3a3 { ++ compatible = "x-powers,axp803"; ++ reg = <0x3a3>; ++ interrupt-parent = <&r_intc>; ++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; ++ }; ++}; ++ ++/* The ANX6345 eDP-bridge is on r_i2c */ ++&r_i2c { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&r_i2c_pl89_pins>; ++ status = "okay"; ++}; ++ ++#include "axp803.dtsi" ++ ++®_aldo1 { ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ regulator-name = "vcc-csi"; ++}; ++ ++®_aldo2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-pl"; ++}; ++ ++®_aldo3 { ++ regulator-always-on; ++ regulator-min-microvolt = <2700000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-pll-avcc"; ++}; ++ ++®_dc1sw { ++ regulator-name = "vcc-lcd"; ++}; ++ ++®_dcdc1 { ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-3v3"; ++}; ++ ++®_dcdc2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-name = "vdd-cpux"; ++}; ++ ++/* DCDC3 is polyphased with DCDC2 */ ++ ++®_dcdc5 { ++ regulator-always-on; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-name = "vcc-dram"; ++}; ++ ++®_dcdc6 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-sys"; ++}; ++ ++®_dldo1 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-hdmi"; ++}; ++ ++®_dldo2 { ++ regulator-min-microvolt = <2500000>; ++ regulator-max-microvolt = <2500000>; ++ regulator-name = "vcc-edp"; ++}; ++ ++®_dldo3 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "avdd-csi"; ++}; ++ ++®_dldo4 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-wifi"; ++}; ++ ++®_eldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "cpvdd"; ++}; ++ ++®_eldo3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vdd-1v8-csi"; ++}; ++ ++®_fldo1 { ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-name = "vcc-1v2-hsic"; ++}; ++ ++®_fldo2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-cpus"; ++}; ++ ++®_ldo_io0 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-usb"; ++ status = "okay"; ++}; ++ ++®_rtc_ldo { ++ regulator-name = "vcc-rtc"; ++}; ++ ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pb_pins>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "host"; ++}; ++ ++&usbphy { ++ usb0_vbus-supply = <®_ldo_io0>; ++ usb1_vbus-supply = <®_ldo_io0>; ++ status = "okay"; ++}; +diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig +new file mode 100644 +index 0000000000..5294dbd2eb +--- /dev/null ++++ b/configs/pinebook_defconfig +@@ -0,0 +1,22 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_SPL=y ++CONFIG_MACH_SUN50I=y ++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y ++CONFIG_DRAM_CLK=552 ++CONFIG_DRAM_ZQ=3881949 ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++CONFIG_R_I2C_ENABLE=y ++# CONFIG_CMD_FLASH is not set ++# CONFIG_SPL_DOS_PARTITION is not set ++# CONFIG_SPL_EFI_PARTITION is not set ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook" ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_SUNXI=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y ++# CONFIG_USB_GADGET is not set ++CONFIG_VIDEO_BRIDGE=y ++CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y +-- +2.11.0 + |