diff options
author | Ludovic Courtès <ludo@gnu.org> | 2014-07-16 11:35:45 +0200 |
---|---|---|
committer | Ludovic Courtès <ludo@gnu.org> | 2014-07-16 15:54:47 +0200 |
commit | cf4a912919e68112a14b93592e89e69c61148419 (patch) | |
tree | 8c1f135aed5b7679d214fb79f2444151e8bb8628 /doc/guix.texi | |
parent | 79ad1c6999fd5dc8496eaf11dc190d46052e6fdb (diff) | |
download | guix-patches-cf4a912919e68112a14b93592e89e69c61148419.tar guix-patches-cf4a912919e68112a14b93592e89e69c61148419.tar.gz |
doc: Move "System Configuration" higher.
* doc/guix.texi (GNU Distribution): Move "System Configuration" right
after "System Installation".
Diffstat (limited to 'doc/guix.texi')
-rw-r--r-- | doc/guix.texi | 935 |
1 files changed, 467 insertions, 468 deletions
diff --git a/doc/guix.texi b/doc/guix.texi index 7187f76936..cbef829f7b 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -2604,12 +2604,12 @@ For information on porting to other architectures or kernels, @menu * System Installation:: Installing the whole operating system. +* System Configuration:: Configuring a GNU system. * Installing Debugging Files:: Feeding the debugger. * Package Modules:: Packages from the programmer's viewpoint. * Packaging Guidelines:: Growing the distribution. * Bootstrapping:: GNU/Linux built from scratch. * Porting:: Targeting another platform or kernel. -* System Configuration:: Configuring a GNU system. @end menu Building this distribution is a cooperative effort, and you are invited @@ -2781,473 +2781,6 @@ guix system disk-image --image-size=800MiB gnu/system/install.scm @file{gnu/system/install.scm} in the source tree for more information about the installation image. - -@node Installing Debugging Files -@section Installing Debugging Files - -@cindex debugging files -Program binaries, as produced by the GCC compilers for instance, are -typically written in the ELF format, with a section containing -@dfn{debugging information}. Debugging information is what allows the -debugger, GDB, to map binary code to source code; it is required to -debug a compiled program in good conditions. - -The problem with debugging information is that is takes up a fair amount -of disk space. For example, debugging information for the GNU C Library -weighs in at more than 60 MiB. Thus, as a user, keeping all the -debugging info of all the installed programs is usually not an option. -Yet, space savings should not come at the cost of an impediment to -debugging---especially in the GNU system, which should make it easier -for users to exert their computing freedom (@pxref{GNU Distribution}). - -Thankfully, the GNU Binary Utilities (Binutils) and GDB provide a -mechanism that allows users to get the best of both worlds: debugging -information can be stripped from the binaries and stored in separate -files. GDB is then able to load debugging information from those files, -when they are available (@pxref{Separate Debug Files,,, gdb, Debugging -with GDB}). - -The GNU distribution takes advantage of this by storing debugging -information in the @code{lib/debug} sub-directory of a separate package -output unimaginatively called @code{debug} (@pxref{Packages with -Multiple Outputs}). Users can choose to install the @code{debug} output -of a package when they need it. For instance, the following command -installs the debugging information for the GNU C Library and for GNU -Guile: - -@example -guix package -i glibc:debug guile:debug -@end example - -GDB must then be told to look for debug files in the user's profile, by -setting the @code{debug-file-directory} variable (consider setting it -from the @file{~/.gdbinit} file, @pxref{Startup,,, gdb, Debugging with -GDB}): - -@example -(gdb) set debug-file-directory ~/.guix-profile/lib/debug -@end example - -From there on, GDB will pick up debugging information from the -@code{.debug} files under @file{~/.guix-profile/lib/debug}. - -In addition, you will most likely want GDB to be able to show the source -code being debugged. To do that, you will have to unpack the source -code of the package of interest (obtained with @code{guix build ---source}, @pxref{Invoking guix build}), and to point GDB to that source -directory using the @code{directory} command (@pxref{Source Path, -@code{directory},, gdb, Debugging with GDB}). - -@c XXX: keep me up-to-date -The @code{debug} output mechanism in Guix is implemented by the -@code{gnu-build-system} (@pxref{Build Systems}). Currently, it is -opt-in---debugging information is available only for those packages -whose definition explicitly declares a @code{debug} output. This may be -changed to opt-out in the future, if our build farm servers can handle -the load. To check whether a package has a @code{debug} output, use -@command{guix package --list-available} (@pxref{Invoking guix package}). - - -@node Package Modules -@section Package Modules - -From a programming viewpoint, the package definitions of the -GNU distribution are provided by Guile modules in the @code{(gnu packages -@dots{})} name space@footnote{Note that packages under the @code{(gnu -packages @dots{})} module name space are not necessarily ``GNU -packages''. This module naming scheme follows the usual Guile module -naming convention: @code{gnu} means that these modules are distributed -as part of the GNU system, and @code{packages} identifies modules that -define packages.} (@pxref{Modules, Guile modules,, guile, GNU Guile -Reference Manual}). For instance, the @code{(gnu packages emacs)} -module exports a variable named @code{emacs}, which is bound to a -@code{<package>} object (@pxref{Defining Packages}). - -The @code{(gnu packages @dots{})} module name space is special: it is -automatically scanned for packages by the command-line tools. For -instance, when running @code{guix package -i emacs}, all the @code{(gnu -packages @dots{})} modules are scanned until one that exports a package -object whose name is @code{emacs} is found. This package search -facility is implemented in the @code{(gnu packages)} module. - -Users can store package definitions in modules with different -names---e.g., @code{(my-packages emacs)}. In that case, commands such -as @command{guix package} and @command{guix build} have to be used with -the @code{-e} option so that they know where to find the package. - -The distribution is fully @dfn{bootstrapped} and @dfn{self-contained}: -each package is built based solely on other packages in the -distribution. The root of this dependency graph is a small set of -@dfn{bootstrap binaries}, provided by the @code{(gnu packages -bootstrap)} module. For more information on bootstrapping, -@ref{Bootstrapping}. - -@node Packaging Guidelines -@section Packaging Guidelines - -The GNU distribution is nascent and may well lack some of your favorite -packages. This section describes how you can help make the distribution -grow. @xref{Contributing}, for additional information on how you can -help. - -Free software packages are usually distributed in the form of -@dfn{source code tarballs}---typically @file{tar.gz} files that contain -all the source files. Adding a package to the distribution means -essentially two things: adding a @dfn{recipe} that describes how to -build the package, including a list of other packages required to build -it, and adding @dfn{package meta-data} along with that recipe, such as a -description and licensing information. - -In Guix all this information is embodied in @dfn{package definitions}. -Package definitions provide a high-level view of the package. They are -written using the syntax of the Scheme programming language; in fact, -for each package we define a variable bound to the package definition, -and export that variable from a module (@pxref{Package Modules}). -However, in-depth Scheme knowledge is @emph{not} a prerequisite for -creating packages. For more information on package definitions, -@ref{Defining Packages}. - -Once a package definition is in place, stored in a file in the Guix -source tree, it can be tested using the @command{guix build} command -(@pxref{Invoking guix build}). For example, assuming the new package is -called @code{gnew}, you may run this command from the Guix build tree: - -@example -./pre-inst-env guix build gnew --keep-failed -@end example - -Using @code{--keep-failed} makes it easier to debug build failures since -it provides access to the failed build tree. Another useful -command-line option when debugging is @code{--log-file}, to access the -build log. - -If the package is unknown to the @command{guix} command, it may be that -the source file contains a syntax error, or lacks a @code{define-public} -clause to export the package variable. To figure it out, you may load -the module from Guile to get more information about the actual error: - -@example -./pre-inst-env guile -c '(use-modules (gnu packages gnew))' -@end example - -Once your package builds correctly, please send us a patch -(@pxref{Contributing}). Well, if you need help, we will be happy to -help you too. Once the patch is committed in the Guix repository, the -new package automatically gets built on the supported platforms by -@url{http://hydra.gnu.org/gnu/master, our continuous integration -system}. - -@cindex substituter -Users can obtain the new package definition simply by running -@command{guix pull} (@pxref{Invoking guix pull}). When -@code{hydra.gnu.org} is done building the package, installing the -package automatically downloads binaries from there -(@pxref{Substitutes}). The only place where human intervention is -needed is to review and apply the patch. - - -@menu -* Software Freedom:: What may go into the distribution. -* Package Naming:: What's in a name? -* Version Numbers:: When the name is not enough. -* Python Modules:: Taming the snake. -* Perl Modules:: Little pearls. -@end menu - -@node Software Freedom -@subsection Software Freedom - -@c Adapted from http://www.gnu.org/philosophy/philosophy.html. - -The GNU operating system has been developed so that users can have -freedom in their computing. GNU is @dfn{free software}, meaning that -users have the @url{http://www.gnu.org/philosophy/free-sw.html,four -essential freedoms}: to run the program, to study and change the program -in source code form, to redistribute exact copies, and to distribute -modified versions. Packages found in the GNU distribution provide only -software that conveys these four freedoms. - -In addition, the GNU distribution follow the -@url{http://www.gnu.org/distros/free-system-distribution-guidelines.html,free -software distribution guidelines}. Among other things, these guidelines -reject non-free firmware, recommendations of non-free software, and -discuss ways to deal with trademarks and patents. - -Some packages contain a small and optional subset that violates the -above guidelines, for instance because this subset is itself non-free -code. When that happens, the offending items are removed with -appropriate patches or code snippets in the package definition's -@code{origin} form (@pxref{Defining Packages}). That way, @code{guix -build --source} returns the ``freed'' source rather than the unmodified -upstream source. - - -@node Package Naming -@subsection Package Naming - -A package has actually two names associated with it: -First, there is the name of the @emph{Scheme variable}, the one following -@code{define-public}. By this name, the package can be made known in the -Scheme code, for instance as input to another package. Second, there is -the string in the @code{name} field of a package definition. This name -is used by package management commands such as -@command{guix package} and @command{guix build}. - -Both are usually the same and correspond to the lowercase conversion of -the project name chosen upstream, with underscores replaced with -hyphens. For instance, GNUnet is available as @code{gnunet}, and -SDL_net as @code{sdl-net}. - -We do not add @code{lib} prefixes for library packages, unless these are -already part of the official project name. But see @pxref{Python -Modules} and @ref{Perl Modules} for special rules concerning modules for -the Python and Perl languages. - - -@node Version Numbers -@subsection Version Numbers - -We usually package only the latest version of a given free software -project. But sometimes, for instance for incompatible library versions, -two (or more) versions of the same package are needed. These require -different Scheme variable names. We use the name as defined -in @ref{Package Naming} -for the most recent version; previous versions use the same name, suffixed -by @code{-} and the smallest prefix of the version number that may -distinguish the two versions. - -The name inside the package definition is the same for all versions of a -package and does not contain any version number. - -For instance, the versions 2.24.20 and 3.9.12 of GTK+ may be packaged as follows: - -@example -(define-public gtk+ - (package - (name "gtk+") - (version "3.9.12") - ...)) -(define-public gtk+-2 - (package - (name "gtk+") - (version "2.24.20") - ...)) -@end example -If we also wanted GTK+ 3.8.2, this would be packaged as -@example -(define-public gtk+-3.8 - (package - (name "gtk+") - (version "3.8.2") - ...)) -@end example - - -@node Python Modules -@subsection Python Modules - -We currently package Python 2 and Python 3, under the Scheme variable names -@code{python-2} and @code{python} as explained in @ref{Version Numbers}. -To avoid confusion and naming clashes with other programming languages, it -seems desirable that the name of a package for a Python module contains -the word @code{python}. - -Some modules are compatible with only one version of Python, others with both. -If the package Foo compiles only with Python 3, we name it -@code{python-foo}; if it compiles only with Python 2, we name it -@code{python2-foo}. If it is compatible with both versions, we create two -packages with the corresponding names. - -If a project already contains the word @code{python}, we drop this; -for instance, the module python-dateutil is packaged under the names -@code{python-dateutil} and @code{python2-dateutil}. - - -@node Perl Modules -@subsection Perl Modules - -Perl programs standing for themselves are named as any other package, -using the lowercase upstream name. -For Perl packages containing a single class, we use the lowercase class name, -replace all occurrences of @code{::} by dashes and prepend the prefix -@code{perl-}. -So the class @code{XML::Parser} becomes @code{perl-xml-parser}. -Modules containing several classes keep their lowercase upstream name and -are also prepended by @code{perl-}. Such modules tend to have the word -@code{perl} somewhere in their name, which gets dropped in favor of the -prefix. For instance, @code{libwww-perl} becomes @code{perl-libwww}. - - - -@node Bootstrapping -@section Bootstrapping - -@c Adapted from the ELS 2013 paper. - -@cindex bootstrapping - -Bootstrapping in our context refers to how the distribution gets built -``from nothing''. Remember that the build environment of a derivation -contains nothing but its declared inputs (@pxref{Introduction}). So -there's an obvious chicken-and-egg problem: how does the first package -get built? How does the first compiler get compiled? Note that this is -a question of interest only to the curious hacker, not to the regular -user, so you can shamelessly skip this section if you consider yourself -a ``regular user''. - -@cindex bootstrap binaries -The GNU system is primarily made of C code, with libc at its core. The -GNU build system itself assumes the availability of a Bourne shell and -command-line tools provided by GNU Coreutils, Awk, Findutils, `sed', and -`grep'. Furthermore, build programs---programs that run -@code{./configure}, @code{make}, etc.---are written in Guile Scheme -(@pxref{Derivations}). Consequently, to be able to build anything at -all, from scratch, Guix relies on pre-built binaries of Guile, GCC, -Binutils, libc, and the other packages mentioned above---the -@dfn{bootstrap binaries}. - -These bootstrap binaries are ``taken for granted'', though we can also -re-create them if needed (more on that later). - -@unnumberedsubsec Preparing to Use the Bootstrap Binaries - -@c As of Emacs 24.3, Info-mode displays the image, but since it's a -@c large image, it's hard to scroll. Oh well. -@image{images/bootstrap-graph,6in,,Dependency graph of the early bootstrap derivations} - -The figure above shows the very beginning of the dependency graph of the -distribution, corresponding to the package definitions of the @code{(gnu -packages bootstrap)} module. At this level of detail, things are -slightly complex. First, Guile itself consists of an ELF executable, -along with many source and compiled Scheme files that are dynamically -loaded when it runs. This gets stored in the @file{guile-2.0.7.tar.xz} -tarball shown in this graph. This tarball is part of Guix's ``source'' -distribution, and gets inserted into the store with @code{add-to-store} -(@pxref{The Store}). - -But how do we write a derivation that unpacks this tarball and adds it -to the store? To solve this problem, the @code{guile-bootstrap-2.0.drv} -derivation---the first one that gets built---uses @code{bash} as its -builder, which runs @code{build-bootstrap-guile.sh}, which in turn calls -@code{tar} to unpack the tarball. Thus, @file{bash}, @file{tar}, -@file{xz}, and @file{mkdir} are statically-linked binaries, also part of -the Guix source distribution, whose sole purpose is to allow the Guile -tarball to be unpacked. - -Once @code{guile-bootstrap-2.0.drv} is built, we have a functioning -Guile that can be used to run subsequent build programs. Its first task -is to download tarballs containing the other pre-built binaries---this -is what the @code{.tar.xz.drv} derivations do. Guix modules such as -@code{ftp-client.scm} are used for this purpose. The -@code{module-import.drv} derivations import those modules in a directory -in the store, using the original layout. The -@code{module-import-compiled.drv} derivations compile those modules, and -write them in an output directory with the right layout. This -corresponds to the @code{#:modules} argument of -@code{build-expression->derivation} (@pxref{Derivations}). - -Finally, the various tarballs are unpacked by the -derivations @code{gcc-bootstrap-0.drv}, @code{glibc-bootstrap-0.drv}, -etc., at which point we have a working C tool chain. - - -@unnumberedsubsec Building the Build Tools - -@c TODO: Add a package-level dependency graph generated from (gnu -@c packages base). - -Bootstrapping is complete when we have a full tool chain that does not -depend on the pre-built bootstrap tools discussed above. This -no-dependency requirement is verified by checking whether the files of -the final tool chain contain references to the @file{/gnu/store} -directories of the bootstrap inputs. The process that leads to this -``final'' tool chain is described by the package definitions found in -the @code{(gnu packages base)} module. - -@c See <http://lists.gnu.org/archive/html/gnu-system-discuss/2012-10/msg00000.html>. -The first tool that gets built with the bootstrap binaries is -GNU Make, which is a prerequisite for all the following packages. -From there Findutils and Diffutils get built. - -Then come the first-stage Binutils and GCC, built as pseudo cross -tools---i.e., with @code{--target} equal to @code{--host}. They are -used to build libc. Thanks to this cross-build trick, this libc is -guaranteed not to hold any reference to the initial tool chain. - -From there the final Binutils and GCC are built. GCC uses @code{ld} -from the final Binutils, and links programs against the just-built libc. -This tool chain is used to build the other packages used by Guix and by -the GNU Build System: Guile, Bash, Coreutils, etc. - -And voilà! At this point we have the complete set of build tools that -the GNU Build System expects. These are in the @code{%final-inputs} -variables of the @code{(gnu packages base)} module, and are implicitly -used by any package that uses @code{gnu-build-system} (@pxref{Defining -Packages}). - - -@unnumberedsubsec Building the Bootstrap Binaries - -Because the final tool chain does not depend on the bootstrap binaries, -those rarely need to be updated. Nevertheless, it is useful to have an -automated way to produce them, should an update occur, and this is what -the @code{(gnu packages make-bootstrap)} module provides. - -The following command builds the tarballs containing the bootstrap -binaries (Guile, Binutils, GCC, libc, and a tarball containing a mixture -of Coreutils and other basic command-line tools): - -@example -guix build bootstrap-tarballs -@end example - -The generated tarballs are those that should be referred to in the -@code{(gnu packages bootstrap)} module mentioned at the beginning of -this section. - -Still here? Then perhaps by now you've started to wonder: when do we -reach a fixed point? That is an interesting question! The answer is -unknown, but if you would like to investigate further (and have -significant computational and storage resources to do so), then let us -know. - -@node Porting -@section Porting to a New Platform - -As discussed above, the GNU distribution is self-contained, and -self-containment is achieved by relying on pre-built ``bootstrap -binaries'' (@pxref{Bootstrapping}). These binaries are specific to an -operating system kernel, CPU architecture, and application binary -interface (ABI). Thus, to port the distribution to a platform that is -not yet supported, one must build those bootstrap binaries, and update -the @code{(gnu packages bootstrap)} module to use them on that platform. - -Fortunately, Guix can @emph{cross compile} those bootstrap binaries. -When everything goes well, and assuming the GNU tool chain supports the -target platform, this can be as simple as running a command like this -one: - -@example -guix build --target=armv5tel-linux-gnueabi bootstrap-tarballs -@end example - -Once these are built, the @code{(gnu packages bootstrap)} module needs -to be updated to refer to these binaries on the target platform. In -addition, the @code{glibc-dynamic-linker} procedure in that module must -be augmented to return the right file name for libc's dynamic linker on -that platform; likewise, @code{system->linux-architecture} in @code{(gnu -packages linux)} must be taught about the new platform. - -In practice, there may be some complications. First, it may be that the -extended GNU triplet that specifies an ABI (like the @code{eabi} suffix -above) is not recognized by all the GNU tools. Typically, glibc -recognizes some of these, whereas GCC uses an extra @code{--with-abi} -configure flag (see @code{gcc.scm} for examples of how to handle this). -Second, some of the required packages could fail to build for that -platform. Lastly, the generated binaries could be broken for some -reason. - - @node System Configuration @section System Configuration @@ -3846,6 +3379,472 @@ on-line documentation. Thus, the commands @command{deco start ncsd}, would expect (@pxref{Invoking deco,,, dmd, GNU dmd Manual}). +@node Installing Debugging Files +@section Installing Debugging Files + +@cindex debugging files +Program binaries, as produced by the GCC compilers for instance, are +typically written in the ELF format, with a section containing +@dfn{debugging information}. Debugging information is what allows the +debugger, GDB, to map binary code to source code; it is required to +debug a compiled program in good conditions. + +The problem with debugging information is that is takes up a fair amount +of disk space. For example, debugging information for the GNU C Library +weighs in at more than 60 MiB. Thus, as a user, keeping all the +debugging info of all the installed programs is usually not an option. +Yet, space savings should not come at the cost of an impediment to +debugging---especially in the GNU system, which should make it easier +for users to exert their computing freedom (@pxref{GNU Distribution}). + +Thankfully, the GNU Binary Utilities (Binutils) and GDB provide a +mechanism that allows users to get the best of both worlds: debugging +information can be stripped from the binaries and stored in separate +files. GDB is then able to load debugging information from those files, +when they are available (@pxref{Separate Debug Files,,, gdb, Debugging +with GDB}). + +The GNU distribution takes advantage of this by storing debugging +information in the @code{lib/debug} sub-directory of a separate package +output unimaginatively called @code{debug} (@pxref{Packages with +Multiple Outputs}). Users can choose to install the @code{debug} output +of a package when they need it. For instance, the following command +installs the debugging information for the GNU C Library and for GNU +Guile: + +@example +guix package -i glibc:debug guile:debug +@end example + +GDB must then be told to look for debug files in the user's profile, by +setting the @code{debug-file-directory} variable (consider setting it +from the @file{~/.gdbinit} file, @pxref{Startup,,, gdb, Debugging with +GDB}): + +@example +(gdb) set debug-file-directory ~/.guix-profile/lib/debug +@end example + +From there on, GDB will pick up debugging information from the +@code{.debug} files under @file{~/.guix-profile/lib/debug}. + +In addition, you will most likely want GDB to be able to show the source +code being debugged. To do that, you will have to unpack the source +code of the package of interest (obtained with @code{guix build +--source}, @pxref{Invoking guix build}), and to point GDB to that source +directory using the @code{directory} command (@pxref{Source Path, +@code{directory},, gdb, Debugging with GDB}). + +@c XXX: keep me up-to-date +The @code{debug} output mechanism in Guix is implemented by the +@code{gnu-build-system} (@pxref{Build Systems}). Currently, it is +opt-in---debugging information is available only for those packages +whose definition explicitly declares a @code{debug} output. This may be +changed to opt-out in the future, if our build farm servers can handle +the load. To check whether a package has a @code{debug} output, use +@command{guix package --list-available} (@pxref{Invoking guix package}). + + +@node Package Modules +@section Package Modules + +From a programming viewpoint, the package definitions of the +GNU distribution are provided by Guile modules in the @code{(gnu packages +@dots{})} name space@footnote{Note that packages under the @code{(gnu +packages @dots{})} module name space are not necessarily ``GNU +packages''. This module naming scheme follows the usual Guile module +naming convention: @code{gnu} means that these modules are distributed +as part of the GNU system, and @code{packages} identifies modules that +define packages.} (@pxref{Modules, Guile modules,, guile, GNU Guile +Reference Manual}). For instance, the @code{(gnu packages emacs)} +module exports a variable named @code{emacs}, which is bound to a +@code{<package>} object (@pxref{Defining Packages}). + +The @code{(gnu packages @dots{})} module name space is special: it is +automatically scanned for packages by the command-line tools. For +instance, when running @code{guix package -i emacs}, all the @code{(gnu +packages @dots{})} modules are scanned until one that exports a package +object whose name is @code{emacs} is found. This package search +facility is implemented in the @code{(gnu packages)} module. + +Users can store package definitions in modules with different +names---e.g., @code{(my-packages emacs)}. In that case, commands such +as @command{guix package} and @command{guix build} have to be used with +the @code{-e} option so that they know where to find the package. + +The distribution is fully @dfn{bootstrapped} and @dfn{self-contained}: +each package is built based solely on other packages in the +distribution. The root of this dependency graph is a small set of +@dfn{bootstrap binaries}, provided by the @code{(gnu packages +bootstrap)} module. For more information on bootstrapping, +@ref{Bootstrapping}. + +@node Packaging Guidelines +@section Packaging Guidelines + +The GNU distribution is nascent and may well lack some of your favorite +packages. This section describes how you can help make the distribution +grow. @xref{Contributing}, for additional information on how you can +help. + +Free software packages are usually distributed in the form of +@dfn{source code tarballs}---typically @file{tar.gz} files that contain +all the source files. Adding a package to the distribution means +essentially two things: adding a @dfn{recipe} that describes how to +build the package, including a list of other packages required to build +it, and adding @dfn{package meta-data} along with that recipe, such as a +description and licensing information. + +In Guix all this information is embodied in @dfn{package definitions}. +Package definitions provide a high-level view of the package. They are +written using the syntax of the Scheme programming language; in fact, +for each package we define a variable bound to the package definition, +and export that variable from a module (@pxref{Package Modules}). +However, in-depth Scheme knowledge is @emph{not} a prerequisite for +creating packages. For more information on package definitions, +@ref{Defining Packages}. + +Once a package definition is in place, stored in a file in the Guix +source tree, it can be tested using the @command{guix build} command +(@pxref{Invoking guix build}). For example, assuming the new package is +called @code{gnew}, you may run this command from the Guix build tree: + +@example +./pre-inst-env guix build gnew --keep-failed +@end example + +Using @code{--keep-failed} makes it easier to debug build failures since +it provides access to the failed build tree. Another useful +command-line option when debugging is @code{--log-file}, to access the +build log. + +If the package is unknown to the @command{guix} command, it may be that +the source file contains a syntax error, or lacks a @code{define-public} +clause to export the package variable. To figure it out, you may load +the module from Guile to get more information about the actual error: + +@example +./pre-inst-env guile -c '(use-modules (gnu packages gnew))' +@end example + +Once your package builds correctly, please send us a patch +(@pxref{Contributing}). Well, if you need help, we will be happy to +help you too. Once the patch is committed in the Guix repository, the +new package automatically gets built on the supported platforms by +@url{http://hydra.gnu.org/gnu/master, our continuous integration +system}. + +@cindex substituter +Users can obtain the new package definition simply by running +@command{guix pull} (@pxref{Invoking guix pull}). When +@code{hydra.gnu.org} is done building the package, installing the +package automatically downloads binaries from there +(@pxref{Substitutes}). The only place where human intervention is +needed is to review and apply the patch. + + +@menu +* Software Freedom:: What may go into the distribution. +* Package Naming:: What's in a name? +* Version Numbers:: When the name is not enough. +* Python Modules:: Taming the snake. +* Perl Modules:: Little pearls. +@end menu + +@node Software Freedom +@subsection Software Freedom + +@c Adapted from http://www.gnu.org/philosophy/philosophy.html. + +The GNU operating system has been developed so that users can have +freedom in their computing. GNU is @dfn{free software}, meaning that +users have the @url{http://www.gnu.org/philosophy/free-sw.html,four +essential freedoms}: to run the program, to study and change the program +in source code form, to redistribute exact copies, and to distribute +modified versions. Packages found in the GNU distribution provide only +software that conveys these four freedoms. + +In addition, the GNU distribution follow the +@url{http://www.gnu.org/distros/free-system-distribution-guidelines.html,free +software distribution guidelines}. Among other things, these guidelines +reject non-free firmware, recommendations of non-free software, and +discuss ways to deal with trademarks and patents. + +Some packages contain a small and optional subset that violates the +above guidelines, for instance because this subset is itself non-free +code. When that happens, the offending items are removed with +appropriate patches or code snippets in the package definition's +@code{origin} form (@pxref{Defining Packages}). That way, @code{guix +build --source} returns the ``freed'' source rather than the unmodified +upstream source. + + +@node Package Naming +@subsection Package Naming + +A package has actually two names associated with it: +First, there is the name of the @emph{Scheme variable}, the one following +@code{define-public}. By this name, the package can be made known in the +Scheme code, for instance as input to another package. Second, there is +the string in the @code{name} field of a package definition. This name +is used by package management commands such as +@command{guix package} and @command{guix build}. + +Both are usually the same and correspond to the lowercase conversion of +the project name chosen upstream, with underscores replaced with +hyphens. For instance, GNUnet is available as @code{gnunet}, and +SDL_net as @code{sdl-net}. + +We do not add @code{lib} prefixes for library packages, unless these are +already part of the official project name. But see @pxref{Python +Modules} and @ref{Perl Modules} for special rules concerning modules for +the Python and Perl languages. + + +@node Version Numbers +@subsection Version Numbers + +We usually package only the latest version of a given free software +project. But sometimes, for instance for incompatible library versions, +two (or more) versions of the same package are needed. These require +different Scheme variable names. We use the name as defined +in @ref{Package Naming} +for the most recent version; previous versions use the same name, suffixed +by @code{-} and the smallest prefix of the version number that may +distinguish the two versions. + +The name inside the package definition is the same for all versions of a +package and does not contain any version number. + +For instance, the versions 2.24.20 and 3.9.12 of GTK+ may be packaged as follows: + +@example +(define-public gtk+ + (package + (name "gtk+") + (version "3.9.12") + ...)) +(define-public gtk+-2 + (package + (name "gtk+") + (version "2.24.20") + ...)) +@end example +If we also wanted GTK+ 3.8.2, this would be packaged as +@example +(define-public gtk+-3.8 + (package + (name "gtk+") + (version "3.8.2") + ...)) +@end example + + +@node Python Modules +@subsection Python Modules + +We currently package Python 2 and Python 3, under the Scheme variable names +@code{python-2} and @code{python} as explained in @ref{Version Numbers}. +To avoid confusion and naming clashes with other programming languages, it +seems desirable that the name of a package for a Python module contains +the word @code{python}. + +Some modules are compatible with only one version of Python, others with both. +If the package Foo compiles only with Python 3, we name it +@code{python-foo}; if it compiles only with Python 2, we name it +@code{python2-foo}. If it is compatible with both versions, we create two +packages with the corresponding names. + +If a project already contains the word @code{python}, we drop this; +for instance, the module python-dateutil is packaged under the names +@code{python-dateutil} and @code{python2-dateutil}. + + +@node Perl Modules +@subsection Perl Modules + +Perl programs standing for themselves are named as any other package, +using the lowercase upstream name. +For Perl packages containing a single class, we use the lowercase class name, +replace all occurrences of @code{::} by dashes and prepend the prefix +@code{perl-}. +So the class @code{XML::Parser} becomes @code{perl-xml-parser}. +Modules containing several classes keep their lowercase upstream name and +are also prepended by @code{perl-}. Such modules tend to have the word +@code{perl} somewhere in their name, which gets dropped in favor of the +prefix. For instance, @code{libwww-perl} becomes @code{perl-libwww}. + + + +@node Bootstrapping +@section Bootstrapping + +@c Adapted from the ELS 2013 paper. + +@cindex bootstrapping + +Bootstrapping in our context refers to how the distribution gets built +``from nothing''. Remember that the build environment of a derivation +contains nothing but its declared inputs (@pxref{Introduction}). So +there's an obvious chicken-and-egg problem: how does the first package +get built? How does the first compiler get compiled? Note that this is +a question of interest only to the curious hacker, not to the regular +user, so you can shamelessly skip this section if you consider yourself +a ``regular user''. + +@cindex bootstrap binaries +The GNU system is primarily made of C code, with libc at its core. The +GNU build system itself assumes the availability of a Bourne shell and +command-line tools provided by GNU Coreutils, Awk, Findutils, `sed', and +`grep'. Furthermore, build programs---programs that run +@code{./configure}, @code{make}, etc.---are written in Guile Scheme +(@pxref{Derivations}). Consequently, to be able to build anything at +all, from scratch, Guix relies on pre-built binaries of Guile, GCC, +Binutils, libc, and the other packages mentioned above---the +@dfn{bootstrap binaries}. + +These bootstrap binaries are ``taken for granted'', though we can also +re-create them if needed (more on that later). + +@unnumberedsubsec Preparing to Use the Bootstrap Binaries + +@c As of Emacs 24.3, Info-mode displays the image, but since it's a +@c large image, it's hard to scroll. Oh well. +@image{images/bootstrap-graph,6in,,Dependency graph of the early bootstrap derivations} + +The figure above shows the very beginning of the dependency graph of the +distribution, corresponding to the package definitions of the @code{(gnu +packages bootstrap)} module. At this level of detail, things are +slightly complex. First, Guile itself consists of an ELF executable, +along with many source and compiled Scheme files that are dynamically +loaded when it runs. This gets stored in the @file{guile-2.0.7.tar.xz} +tarball shown in this graph. This tarball is part of Guix's ``source'' +distribution, and gets inserted into the store with @code{add-to-store} +(@pxref{The Store}). + +But how do we write a derivation that unpacks this tarball and adds it +to the store? To solve this problem, the @code{guile-bootstrap-2.0.drv} +derivation---the first one that gets built---uses @code{bash} as its +builder, which runs @code{build-bootstrap-guile.sh}, which in turn calls +@code{tar} to unpack the tarball. Thus, @file{bash}, @file{tar}, +@file{xz}, and @file{mkdir} are statically-linked binaries, also part of +the Guix source distribution, whose sole purpose is to allow the Guile +tarball to be unpacked. + +Once @code{guile-bootstrap-2.0.drv} is built, we have a functioning +Guile that can be used to run subsequent build programs. Its first task +is to download tarballs containing the other pre-built binaries---this +is what the @code{.tar.xz.drv} derivations do. Guix modules such as +@code{ftp-client.scm} are used for this purpose. The +@code{module-import.drv} derivations import those modules in a directory +in the store, using the original layout. The +@code{module-import-compiled.drv} derivations compile those modules, and +write them in an output directory with the right layout. This +corresponds to the @code{#:modules} argument of +@code{build-expression->derivation} (@pxref{Derivations}). + +Finally, the various tarballs are unpacked by the +derivations @code{gcc-bootstrap-0.drv}, @code{glibc-bootstrap-0.drv}, +etc., at which point we have a working C tool chain. + + +@unnumberedsubsec Building the Build Tools + +@c TODO: Add a package-level dependency graph generated from (gnu +@c packages base). + +Bootstrapping is complete when we have a full tool chain that does not +depend on the pre-built bootstrap tools discussed above. This +no-dependency requirement is verified by checking whether the files of +the final tool chain contain references to the @file{/gnu/store} +directories of the bootstrap inputs. The process that leads to this +``final'' tool chain is described by the package definitions found in +the @code{(gnu packages base)} module. + +@c See <http://lists.gnu.org/archive/html/gnu-system-discuss/2012-10/msg00000.html>. +The first tool that gets built with the bootstrap binaries is +GNU Make, which is a prerequisite for all the following packages. +From there Findutils and Diffutils get built. + +Then come the first-stage Binutils and GCC, built as pseudo cross +tools---i.e., with @code{--target} equal to @code{--host}. They are +used to build libc. Thanks to this cross-build trick, this libc is +guaranteed not to hold any reference to the initial tool chain. + +From there the final Binutils and GCC are built. GCC uses @code{ld} +from the final Binutils, and links programs against the just-built libc. +This tool chain is used to build the other packages used by Guix and by +the GNU Build System: Guile, Bash, Coreutils, etc. + +And voilà! At this point we have the complete set of build tools that +the GNU Build System expects. These are in the @code{%final-inputs} +variables of the @code{(gnu packages base)} module, and are implicitly +used by any package that uses @code{gnu-build-system} (@pxref{Defining +Packages}). + + +@unnumberedsubsec Building the Bootstrap Binaries + +Because the final tool chain does not depend on the bootstrap binaries, +those rarely need to be updated. Nevertheless, it is useful to have an +automated way to produce them, should an update occur, and this is what +the @code{(gnu packages make-bootstrap)} module provides. + +The following command builds the tarballs containing the bootstrap +binaries (Guile, Binutils, GCC, libc, and a tarball containing a mixture +of Coreutils and other basic command-line tools): + +@example +guix build bootstrap-tarballs +@end example + +The generated tarballs are those that should be referred to in the +@code{(gnu packages bootstrap)} module mentioned at the beginning of +this section. + +Still here? Then perhaps by now you've started to wonder: when do we +reach a fixed point? That is an interesting question! The answer is +unknown, but if you would like to investigate further (and have +significant computational and storage resources to do so), then let us +know. + +@node Porting +@section Porting to a New Platform + +As discussed above, the GNU distribution is self-contained, and +self-containment is achieved by relying on pre-built ``bootstrap +binaries'' (@pxref{Bootstrapping}). These binaries are specific to an +operating system kernel, CPU architecture, and application binary +interface (ABI). Thus, to port the distribution to a platform that is +not yet supported, one must build those bootstrap binaries, and update +the @code{(gnu packages bootstrap)} module to use them on that platform. + +Fortunately, Guix can @emph{cross compile} those bootstrap binaries. +When everything goes well, and assuming the GNU tool chain supports the +target platform, this can be as simple as running a command like this +one: + +@example +guix build --target=armv5tel-linux-gnueabi bootstrap-tarballs +@end example + +Once these are built, the @code{(gnu packages bootstrap)} module needs +to be updated to refer to these binaries on the target platform. In +addition, the @code{glibc-dynamic-linker} procedure in that module must +be augmented to return the right file name for libc's dynamic linker on +that platform; likewise, @code{system->linux-architecture} in @code{(gnu +packages linux)} must be taught about the new platform. + +In practice, there may be some complications. First, it may be that the +extended GNU triplet that specifies an ABI (like the @code{eabi} suffix +above) is not recognized by all the GNU tools. Typically, glibc +recognizes some of these, whereas GCC uses an extra @code{--with-abi} +configure flag (see @code{gcc.scm} for examples of how to handle this). +Second, some of the required packages could fail to build for that +platform. Lastly, the generated binaries could be broken for some +reason. + + @c ********************************************************************* @node Contributing @chapter Contributing |